How to make up the color of the Gundam model
Complementary colors are a key skill in Gundam model making, especially for Gundam enthusiasts who are pursuing perfect details. Complementary colors not only make the model more realistic, but also make up for the lack of color in the original kit. The following are structured data and detailed tutorials on Gundam model complementary colors in the hot topics on the entire network in the past 10 days.
1. Basic tools and materials for color replenishment
| Tools/materials | use | Recommended Brands |
|---|---|---|
| Model paint | Used for complementary colors, common water-based paints and oil-based paints | Tamiya, Mr. Hobby |
| Brush | Used for small area complementary colors, you need to choose a fine-tip brush | GSI Creos, Winsor & Newton |
| Cover tape | Prevent other parts from being polluted when supplementing colors | Tamiya Masking Tape |
| Diluent | Used to dilute paint and adjust concentration | Tamiya X-20A |
2. Steps to make up for color
1.Clean the surface of the model: Use alcohol cotton pads or clean water to clean areas that need to be supplemented to ensure there is no dust or grease.
2.Cover the parts that do not require complementary colors: Use cover tape to cover the surrounding area to avoid paint spilling.
3.Making paint: Mix the model paint with the diluent in proportion (usually 1:1 ratio) according to the desired color.
4.Complementary color: Dip a small amount of paint with a fine-neck brush and apply it gently to the areas where the color needs to be supplemented. Pay attention to controlling the amount of paint to avoid pileup.
5.dry: After the color replenishment is completed, let the model stand until the paint is completely dry (usually 1-2 hours).
6.Check the effect: Check the color replenishment effect after drying. If there is any unevenness, you can perform a secondary color replenishment.
3. Color replenishment skills
| Skill | illustrate |
|---|---|
| Thin coated multi-layer | Apply a thin layer each time and then apply the next layer after drying to avoid excessive paint. |
| Using the color palette | Mix colors on the palette to make sure the colors are consistent. |
| Protective paint | Spray a layer of protective paint after finishing the color to prevent fading. |
4. Frequently Asked Questions and Solutions
1.Paint spills: Use a cotton swab to dip it in a small amount of diluent and gently wipe the overflowing part.
2.Uneven color: Pay attention to the direction and strength of the brush when filling in the colors, and keep it evenly applied.
3.Drying time too long: A hair dryer can be used to accelerate drying at low temperature, but it must be kept at a certain distance.
5. Hot topic data across the entire network
| Hot Topics | Discussion hot topic | Main Platforms |
|---|---|---|
| Gundam model color complementary skills | high | B station, Post Bar |
| Model Paint Selection Guide | middle | Zhihu, Weibo |
| Recommended color replenishment tools | high | Taobao, JD.com |
6. Summary
Gundam model complementary color is a job that requires patience and skill, but with the right tools and methods, even newbies can easily get started. Complementary colors can not only improve the overall effect of the model, but also make the model more personalized. I hope that the structured data and detailed steps in this article can help you to get to the next level in Gundam model production!
check the details
check the details
en
